Panasonic Omnivision PV-C2542 Service Manual Download

Page: 175 / 251

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Tape Operation

(continued)

Repeat Play

Set to see a recording over and over.

1) Press

select
“REPEAT
PLAY.”

2) Press to

set REPEAT
PLAY “ON” or
“OFF.”

M A I N MENU

T V

VCR

EX I T

CLOCK

C H

LANGUAGE

SET : ACT I ON

SELECT :

1) Press

to select “VCR.”

2) Press

ACTION to
display SET
UP VCR
screen.

Press ACTION to display
MAIN MENU.

Press ACTION twice
to end setup.

Zero Search

To quickly return to a specific tape counter location.

Press STOP.

4
5

Continue playback, rewind, or
fast forward.

Press COUNTER
RESET at the
desired position to
reset to “0:00:00.”

• Unit goes into FF or REW mode and stops at

the last point the Counter was set to 0:00:00.

Press DISPLAY* during playback to
display the Counter.

• Playback repeats when tape end is reached or

unrecorded portion over 30 seconds is detected.

• During playback, you may also press PLAY/

REPEAT repeatedly on the unit to select
REPEAT “ON” or “OFF.”

Press CM/ZERO
in stop mode to
start ZERO
SEARCH.

• : Present position mark

: Zero position mark

BEG I N END

1 : 23 : 45

BEG I N END

0 : 00 : 00

• If a blank portion exists on the tape, and

depending on the position of the mark, the

mark display may be out of position.

Notes

Press CM/ZERO repeatedly to
select skip time in Play mode.

• No indication appears.

Commercial Skip

By pressing the CM/ZERO button in Playback mode
you can skip over 1 to 3 minutes of recorded tape in
just a few seconds.

Note

REPEAT PLAY : OFF

T I MER PROGRAM
REMOTE WARN I NG : ON

SELECT :    KEY
SET    :    KEY
END    : ACT I ON  KEY

SET UP VCR

*Important: If a remote control button does not work when pressed, press the COMBO button

on the remote and try the button again.

LSQT0582A_P22-33.p65

12/14/2001, 1:52 PM

Summary of Contents for Omnivision PV-C2542




























































































































































































































































Search results

Summary of Contents for Omnivision PV-C2542

Reviews:

Related manuals for Omnivision PV-C2542

Brands by name

Popular brands

Panasonic Omnivision PV-C2542, Service Manual

Search results

Summary of Contents for Omnivision PV-C2542

Reviews:

Related manuals for Omnivision PV-C2542

Brands by name

Popular brands