Security Warning window on Microsoft Windows XP Service Pack 2
To view a video (Motion JPEG) or to use audio feature, ActiveX Controls must be installed.
Follow the steps shown below to install ActiveX Controls.
Click the warning displayed above the tabs, and click [Install
ActiveX Control...].
Click [Install].
4.
Mount the camera.
The camera can be mounted in the following ways.
•
Do not mount the camera where the sun light directly hits the camera or in the outdoor type housing without temperature control system. The camera may
malfunction due to high temperature.
•
When you mount the camera, always hook the power cord and audio cables to the hooks.
Note
Stand Mount
Wall Mount
Tripod Mount
Ceiling Mount
Stand/Tripod
Mounting Hole
Flexible
Stand
Screw the threaded mount
into the stand/tripod
mounting hole.
Turn the grip firmly.
Stand/Tripod
Mounting Hole
Tripod
• Do not mount the camera upside down. The image may be displayed upside
down.
• When mounting, we suggest using the hardware we provide. Mounting in any
other manner may cause the camera to fall, causing personal injury or damage
to the camera.
• To reduce the load on the mounting hardware, dress the cables neatly and
secure with tape.
Note
Make sure the indicator is
always in the lower right
corner.
Top
Bottom
• Do not mount the camera upside down. The image may be displayed upside
down.
• When mounting, we suggest using the hardware we provide. Mounting in any
other manner may cause the camera to fall, causing personal injury or damage
to the camera.
• To reduce the load on the mounting hardware, dress the cables neatly and
secure with tape.
Note
Hook for
AC adaptor cord
Hook for
Audio Cables
Mount the flexible stand firmly to the
ceiling with the three screws (items).
Attach the camera screwing the
threaded mount into the stand
mounting hole.
Adjust the camera position
and secure the flexible stand firmly.
Dress the cables neatly and secure
with tape (customer-provided).
Screw
Grip
Tape
(customer-
provided)
Stand
Mounting
Hole
Do not mount the camera on a soft
material. The camera may fall and
break down.
Use appropriate screws suited for
the material of the ceiling.
Mount the flexible stand firmly to the
wall with the three screws (items).
Attach the camera screwing the
threaded mount into the stand/tripod
mounting hole.
Adjust the camera position
and secure the flexible stand firmly.
Dress the cables neatly and secure
with tape (customer-provided).
Screw
Indicator
Stand/Tripod
Mounting
Hole
Grip
Tape
(customer-
provided)
Do not mount the camera on a soft
material. The camera may fall and
break down.
Use appropriate screws suited for
the material of the wall.
