58
Adjustments and Settings for Recording
:
Selecting Audio Input Signals and Adjusting Recording Levels
You can select the recording level adjustment method from
among three methods, the adjustment control/adjustment
with menu options/automatic adjustment.
With the VR Select menu option, select the two channels,
CH1/2 or CH3/4, to assign to the adjustment controls. The
VR SELECT menu option can be selected from the <MIC/
AUDIO> screen of the MAIN OPERATION page.
The two channels which are not selected become automatic
adjustment, but it is also possible to select adjustment with
the menu option.
The factory settings assign CH1/2 to the adjustment
controls.
With the VR SELECT menu option, select either CH1/2 or
CH3/4 to assign the AUDIO LEVEL CH/1/3 / CH2/4 controls.
CH1/2: Assigns AUDIO LEVEL CH1/3 / CH2/4 controls to
channels 1/2.
AUDIO SELECT CH1/3 / CH2/4 switches are
enabled for channels 1/2.
The channels 3/4 become automatic adjustment,
but the automatic adjustment is released by setting
the AUTO LEVEL CH3 menu option and AUTO
LEVEL CH4 menu option to “OFF”, making it
possible to adjust the level with the LVL CONTROL
CH3 menu option and LVL CONTROL CH4 menu
option. You can select each menu option from the
<MIC/AUDIO> screen of the MAIN OPERATION
page.
CH3/4: Assigns AUDIO LEVEL CH1/3 / CH2/4 controls to
channels 3/4. AUDIO SELECT CH1/3 / CH2/4
switches are enabled for the channels 3/4. The
channels 1/2 become automatic adjustment, but the
automatic adjustment is released by setting the
AUTO LEVEL CH1 menu option and AUTO LEVEL
CH2 menu option to “OFF”, making it possible to
adjust the level with the LVL CONTROL CH1 menu
option and LVL CONTROL CH2 menu option.
Audio level adjustment menu
Note
When the VR SELECT menu option is changed, the value of
each menu option in the menu screens above is inherited. For
example, the AUTO LEVEL CH1 menu option inherits the value
of the AUTO LEVEL CH3 and vice versa.
Selection of level adjustment for channel 1 and 2
Level adjustment methods for channel 1 and 2 are selected
with the AUDIO SELECT CH1/3 / CH2/4 switches, either
[AUTO] (automatic adjustment) or [MAN] (manual
adjustment with the adjustment knob). When [MAN] is
selected, volume for channel 1 and 2 is controlled with the
AUDIO LEVEL CH1/3 / CH2/4 knobs.
Recording level adjustment
Selecting the level adjustment method
When the level adjustment controls are assigned
to CH1/2
Select CH1/2 on the VR SELECT menu option
Select CH3/4 on the VR SELECT menu option
AUDIO LEVEL
CH1/3 / CH2/4
controls
Display
window
AUDIO
SELECT CH1/3
/ CH2/4 switch
AJ-HPX3100G(VQT3A79)_E.book 58 ページ ２０１０年９月１７日 金曜日 午後９時２１分
