manualshive.com logo in svg

Panasonic P2HD AJ-HPX3100G, Operating Instructions Manual

The Panasonic P2HD AJ-HPX3100G is a professional-grade camcorder that delivers exceptional video quality. To ensure that users can make the most of its features, an operating instructions manual is provided. You can download this manual for free from 88.208.23.73:8080, enabling you to unlock the full potential of your camcorder.

Share
Download
background image

80

Adjustments and Settings for Recording

 : 

Viewfinder Screen Status Displays

Information Item

Indication

Status

13. System information 

and warnings

SYSTEM ERROR-

¢¢

TURN POWER OFF

CARD ERR 

¢

REC WARNING
OVER MAX# CLIPS

TEMPORARY PAUSE

BACKUP BATT EMPTY
FAN STOP
WIRELESS-RF
EOM
BOS
EOS
CANNOT REC

CANNOT PLAY

COMM ERROR

TEXT MEMO
TEXT MEMO INVALID
MARK ON/OFF

SHOT MARK INVALID
UPDATING
USB DEVICE

USB HOST

THUMBNAIL OPEN
CLIP DISCONTINUED

TC REGEN

SLOT SELECT

SLOT SELECT INVALID

DIR NG CARD

SLOT1/2

RUN DOWN CARD

SLOT1/2

REAR XR AUTO

Something abnormal is happening to the internal computer communications or 
reference signal. No further recording or playback can be performed. 

¢¢ 

is 

replaced with an error code. For more information, see [Error Codes] (page 155).
P2 card has been removed while being accessed (recorded, played back, or 
formatted), and subsequent operation is disabled.
An error has occurred while recording data to or playing data from a P2 card. 
In the actual indication the 

¢

 is replaced by the slot number of the P2 card that 

triggered the error.
Something abnormal is happening to video and/or audio being recorded.
Displayed when the maximum number of clips (1000) recorded to the P2 card 
is exceeded.
There is a temporary halt in recording due to distortion in reference signals 
such as during GENLOCK input. 
Backup battery needs replacing.
The fan is locked and halted.
RF signal from the wireless receiver is degraded.
P2 card has no free space. 
Playback position is at the start of all the clips.
Playback position is at the end of all the clips.
The P2 card is not recordable. Detailed information is provided on the 
FUNCTION screen of MODE CHECK. 

>

[Displays in mode check only] (page 82)

Clip cannot be played back perhaps because no P2 card is loaded, or the P2 
card contains no clips.
Displayed when disconnection between microcomputers continues for a 
specified period or longer.
Text memo has been added.
Text memo has not been successfully added.
Shot mark been added or deleted. For information on shot marks, see [Shot 
Mark Function] (page 46).

This is displayed when shot marks cannot be added.

Clip information is being updated. Playback operation disabled.
AJ-HPX3100 is in USB DEVICE mode. When communication is disabled, the 
indication blinks.
Indicates that the camera-recorder is set to the USB HOST mode. When the 
external hard disk is not successfully recognized, then the indication blinks.
Thumbnail is being manipulated. 
Displayed when the consistency of the combined clip is disrupted and 
subsequent recordings cannot be combined in the clip when recording in ONE 
CLIP REC mode.
The RET button was pressed to regenerate the time code as the time code for 
the last clip recorded on a P2 card.

This blinks while the recording slots of P2 cards are switched after pressing 
the USER switch where the SLOT SEL function is assigned.
This is displayed if the recording slots of P2 cards cannot be switched when 
the USER switch where the SLOT SEL function is assigned is pressed.
This is displayed when the recording starts or completes while a P2 card with 
an irregular directory arrangement is inserted or data are recorded after 
inserting an irregular P2 card.

This is displayed when the recording starts or completes with a P2 card on 
which the maximum number of overwrites has been exceeded, or when data 
is recorded after inserting such a P2 card.
The AUDIO IN switch is disabled because audio input automatically goes to 
the rear XLR connector. 

14. Time code indication

TCG

12:59:59:20

TCR

12:59:59:20

(V)UBG

AB CD EF 00

(V)UBR

12 34 56 78

CTL

–1:59:59:20

TCG (time code generator value)
TCR (time code reader value)
UBG VUBG (User bits generator value)
UBR VUBR (User bits reader value)
Displays CTL count.

15. Chromatic aberration 

compensation

CAC

Displayed when chromatic aberration compensation is activated

16. Extender

EX

Lens extender used.

17. Color temperature

¢

.

¢

K

Color temperature assigned to A, B, and PRST of the WHITE BAL switch (this 
is a value stored at AWB performance or a value set through the menu 
option). The indication is not provided in ATW mode.

18. Filter position

1 - 4
A - D

 (blink)

This indicates the position of the ND filter.
This indicates the position of the CC filter.
This indicates that the filter has not been set to a proper position.

19. Dynamic range 

stretcher mode

DRS

This appears when the video level of a part with high brightness is 
compressed, and the function stretching the dynamic range is selected.

AJ-HPX3100G(VQT3A79)_E.book  80 ページ  ２０１０年９月１７日　金曜日　午後９時２１分

Summary of Contents for P2HD AJ-HPX3100G

















































































































































































































Reviews:

No comments

Related manuals for P2HD AJ-HPX3100G

Panasonic NV-GS27GN Operating Instructions Manual preview
NV-GS27GN
Brand: Panasonic Pages: 44
Vivitar DVR 558HD-V1 User Manual preview
DVR 558HD-V1
Brand: Vivitar Pages: 69
Magnavox CVT325AV01 Owner'S Manual preview
CVT325AV01
Brand: Magnavox Pages: 40
Panasonic NV-GS5EG Service Manual preview
NV-GS5EG
Brand: Panasonic Pages: 260
Panasonic NV-GS180EG Service Manual preview
NV-GS180EG
Brand: Panasonic Pages: 62
Panasonic VDR-D220EP Operating Instructions Manual preview
VDR-D220EP
Brand: Panasonic Pages: 220
MAGINON CBB 2 Instruction Manual preview
CBB 2
Brand: MAGINON Pages: 32
VARIZOOM VZ-DV RODS Instruction Manual preview
VZ-DV RODS
Brand: VARIZOOM Pages: 2
Samsung 8 VP-W60B Owner'S Instruction Book preview
8 VP-W60B
Brand: Samsung Pages: 64
JVC SR-VS30U Service Manual preview
SR-VS30U
Brand: JVC Pages: 136
JVC SR-VS30U Instructions Manual preview
SR-VS30U
Brand: JVC Pages: 84
JVC SR-VS30U Brochure & Specs preview
SR-VS30U
Brand: JVC Pages: 4
Sony DCR-HC15 Service Manual preview
DCR-HC15
Brand: Sony Pages: 74
Sony DCR-HC15 Operation Manual preview
DCR-HC15
Brand: Sony Pages: 116
Sony DCR-HC20 - Digital Handycam Camcorder Operation Manual preview
DCR-HC20 - Digital Handycam Camcorder
Brand: Sony Pages: 100
Sony DCR-HC1000 - Digital Handycam Camcorder Operation Manual preview
DCR-HC1000 - Digital Handycam Camcorder
Brand: Sony Pages: 140
Sony DCR-HC1000 - Digital Handycam Camcorder Specifications preview
DCR-HC1000 - Digital Handycam Camcorder
Brand: Sony Pages: 2
Sony DCR-HC1000 - Digital Handycam Camcorder Service Manual preview
DCR-HC1000 - Digital Handycam Camcorder
Brand: Sony Pages: 101

Brands by name

Popular brands

Load more brands