45
Special
Features
Special
Features
3, 4
JOG KEY
2
MENU
Button
1
POWER Switch
Picture in Picture (PinP)
You can display a PinP (still image) screen
on the Main Picture.
• PinP position is fixed at the bottom right
of the screen.
Note
Before you begin
• Connect the Palmcorder to a power
source. (See pages 11, 12.)
1
Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
2
Press MENU to display the menu
screen.
3
Rotate JOG KEY repeatedly to select
D.FUNCTION
, then press JOG KEY
to display the CAMERA FUNCTION
menu screen.
4
Press JOG KEY to select
PinP
.
• Press MENU twice to exit this menu.
5
Aim at the scene you wish to place as
PinP, then press CAMERA STILL to
freeze the image.
6
Press CAMERA STILL again to place
the frozen image as PinP.
7
Press REC/PAUSE to record a scene
with PinP image.
• Press PHOTOSHOT to record a
scene with PinP image in PhotoShot
mode.
• Press CAMERA STILL again to
remove PinP image.
Main Picture
Picture in Picture
(PinP still image)
5, 6, 7
CAMERA STILL Button
PHOTOSHOT
Button
Special Features
Special Features
201_401.43-45.p65
01/01/18, 17:08
45
