18
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
Camera Recording
1
Set POWER to
CAMERA.
2
Press MENU
for
MENU mode.
Press UP or DOWN
to select
STAND-BY RELEASE
.
3
Press M.FOCUS
to select ON or OFF.
ON :
From Stand-by mode, press
RECORD/PAUSE two times to
resume recording.
OFF :
From Stand-by mode, set
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
4
Press MENU
to exit.
Stand-by Quick Release
a
Press RECORD/PAUSE to stop
recording.
b
Set POWER to OFF
and leave
cassette in Camcorder.
c
To resume recording,
set POWER to
CAMERA.
d
Press RECORD/PAUSE
to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than
24 hours has passed before recording
was resumed.
Manual Easy Editing
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
For proper continuity when taping from Stop
mode or after attaching a new Battery.
Easy Edit Stand-by
A
Set POWER to VCR.
B
a
Press
(REWIND/SEARCH)
to
rewind a few seconds of tape.
b
Press
(PLAY/STILL)
to review
recording.
c
Press
(PLAY/STILL)
at the
point where you will want to continue
the recording.
C
Set POWER to CAMERA.
D
Press RECORD/PAUSE
to resume
recording.
B
1
,
A
,
C
,
b
,
c
D
,
a
,
d
2
,
3
,
4
a
b c
If left in RECORD/PAUSE mode for 5
minutes, the Camcorder switches to
Stand-by mode to conserve battery power.
When set to ON, Stand-by Quick Release
lets you resume recording by pressing
RECORD/PAUSE twice. The default
setting from the factory is OFF mode.
03.L354K Basic p17-19
04.1.6, 0:23 PM
18
