background image

¤

Things You Should Know

Section 7

Splash-Resistant

The unit is designed to be splash resistant. You can use the unit with wet
hands.

CAUTION:

Do not immerse in water or leave under running water.

Keep the unit away from salt water.

Avoid exposure to prolonged high humidity.

Since water in the MIC/SP jack or DC IN 4.5 V jack may cause damage,
close the rubber cap(s) when the optional accessory(ies) is(are) not in use.
When the optional accessory(ies) is(are) connected, do not use the unit
with wet hands.

If the unit is wet, wipe with a soft dry cloth.

Shock-Resistant

Although the unit is designed to be shock resistant, do not throw or step on
the unit.

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these
instructions.

1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. It(they) may explode. Check

with local waste management codes for special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive

and may cause burns or injury to the eyes or skin. The electrolyte may
be toxic if swallowed.

7-E Safety Instructions

ause

s unit.

or

al

such

nit
d.

nit

o use

ately

t

z and
to

itals

e

nzine,

actory

2-B).

ram

er

may be

ehicles

ear

sion.

uch

n of

arty.

part.

arty.

sion.

the

tinue,

1-C).

1-C).

4. Exercise care in handling battery(ies) in order not to short the battery(ies)

to conductive materials such as rings, bracelets, and keys. The
battery(ies) and/or conductor may overheat and cause burns.

5. Do not recharge the battery(ies) provided with or identified for use with

this product. The battery(ies) may leak corrosive electrolyte or explode.

6. Do not attempt to rejuvenate the battery(ies) provided with or identified

for use with this product by heating. Sudden release of battery electrolyte
may occur causing burns or irritation to the eyes or skin.

7. Replace all batteries at the same time. Mixing fresh and discharged

batteries could increase internal cell pressure and rupture the discharged
batteries. (Applies to products employing more than one separately
replaceable primary battery.)

8. When installing batteries observe the proper polarity or direction.

Incorrect installation can cause charging, and may result in leakage or
explosion. (Applies to products employing more than one separately
replaceable primary battery.)

9. Remove the battery(ies) from this product if the product will not be used

for a long period of time (several months or more). During this time the
battery(ies) could leak in the product.

10. Discard the “dead” battery(ies) as soon as possible. The “dead”

battery(ies) may leak in the product.

11. Do not store this product, or the battery(ies) provided with or identified for

use with this product, in high temperature areas. Batteries that are stored
in a freezer or refrigerator for the purpose of extending shelf life should
be protected from condensation during storage and defrosting. Batteries
should be stabilized at room temperature prior to use after cold storage.

LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to
any product which has been improperly installed, subjected to usage for
which the product was not designed, misused or abused, damaged during
shipping, or which has been altered or repaired in any way that affects the
reliability or detracts from the performance, nor does it cover any product
which is used commercially. Dry cell batteries are also excluded from
coverage under this warranty. Rechargeable batteries are warranted for
ninety (90) days from date of original purchase.
This warranty is extended to the original end user purchaser only. A
purchase receipt or other proof of date of original purchase is required
before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, or the exclusion of
implied warranties, so the above limitations and exclusions may not be
applicable.

WARRANTY SERVICE

For product operation and information assistance, please contact
your Dealer or our Customer Care Centre at:
Telephone #:  (905) 624-5505

Fax #:  (905) 238-2360

Web: www.panasonic.ca

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT–LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as
stated below from the date of original purchase.

Telephone Accessory/Product

—One (1) year, parts and labour

FRS (Family Radio Service) Product

—One (1) year, parts and labour

For product repairs, please contact one of the following:

Your Dealer who will inform you of an authorized Servicentre nearest you.

Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca

A Panasonic Factory Servicentre listed below:

Richmond, British Columbia

Calgary, Alberta

Panasonic Canada Inc.

Panasonic Canada Inc.

13131 Bathgate Place

6835-8

th

St. N. E.

Richmond, BC

V6V 1Z3

Calgary, AB

T2E 7H7

Tel: (604) 278-4211

Tel: (403) 295-3955

Fax: (604) 278-5627

Fax: (403) 274-5493

Mississauga, Ontario

Lachine, Québec

Panasonic Canada Inc.

Panasonic Canada Inc.

5770 Ambler Dr.

3075, rue Louis A. Amos

Mississauga, ON

L4W 2T3

Lachine, QC

H8T 1C4

Tel: (905) 624-8447

Tel: (514) 633-8684

Fax: (905) 238-2418

Fax: (514) 633-8020

CUSTOMER’S RECORD:
Customer Name: _____________________________________________

Model Number: _______________ Serial Number:__________________

Date of Purchase: ___________________________________________

Dealer’s Name: ______________________________________________

Address: ____________________ Phone Number: _________________

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of
original purchase.

PQQX12651XA-BM  00.7.27 9:56 AM  ページ 15

Summary of Contents for PalmLink KX-TR320CF









Reviews: