For Your Reference
51
RQT6050
GUI screens are cut off or
are not displayed at all.
No On-Screen display.
“Check The Disc” appears
on the LCD.
“This track is error”
appears on the LCD.
ERROR
∑ ∑
∑ ∑
stands for a number.
H
∑∑
∑∑
stands for a number.
Use [
3
,
4
] while the rightmost icon is highlighted to
move them down.
H
Go to the Display menu in the SETUP screen, and select
“On” for “On-Screen Messages”.
W
Clean the disc.
d
You are playing a nonstandard disc.
“ERROR 01”: A problem has occurred with the
built-in battery or battery pack.
Consult your dealer.
“ERROR 02”: The built-in battery or battery pack
has been recharging for 12 hours
but has failed to recharge for some
reason. Recharge again.
“ERROR 03”: You are recharging in a location
that is too hot or too cold. Recharge
at normal temperature.
Trouble has occurred. The number appearing after H
depends on the problem. Turn the unit off and on again.
Alternatively, turn the unit off, disconnect the power
source (AC or battery) reconnect the power and turn the
unit on again.
If the service numbers fail to clear, note the service
number and contact a qualified service person.
Note
The following do not indicate malfunction.
≥
A sound is heard from the AC adaptor during recharging.
≥
The built-in battery and battery pack warm up after recharging or during use.
Maintenance
∫
To clean this unit, wipe with a soft, dry
cloth.
≥
Use eyeglass cleaner to remove stubborn
dirt from the LCD.
≥
Never use alcohol, paint thinner or
benzine to clean this unit.
≥
Before using chemically treated cloth, read
the instructions that came with the cloth
carefully.
Displays
∫
Maintenance of the lens
≥
If dust is attached to the lens, remove dust
carefully with an air blower for camera
lenses (optional).
≥
Recommended product:
≥≥
Lens cleaner kit (SZZP1038C)
≥≥
(available from Panasonic dealers)
≥
Be careful not to touch the lens with your
fingers.