PAN1780 Bluetooth Module
4 Reference Design
Module Integration Guide Rev. 1.1
Page 16 of 44
4.5 Configuration Settings
Jumper JP11
Do not place JP11, if an external 3.3 V source is present.
After each different configuration the reset button needs to be pressed.
Jumper
Layout
Description
JP1
5 V from USB connected
5 V power option, to power
the board from USB or the 5 V
pin. The 5 V from USB can
also be used to power the
sensor board.
5 V from or to breakout pin
connected