PAN1780 Bluetooth Module
5 Getting Started
Module Integration Guide Rev. 1.1
Page 33 of 44
Click on the slider (1) to toggle the LED3 on PAN1780 ETU.
1.
The button “SW1” on PAN1780 can be pressed, to send status of the button to the
2.
mobile app (2).
In parallel a terminal can be used, to get information about the current status from module via
UART:
Connect the PAN1780 on USB port X2 to the PC.
1.
Open the COM port of PAN1780 with the following configuration:
2.
– Baud 115200
– Data 8
– Parity N
– Stop 1
