PAN1782 Bluetooth Module
4 Specification
Product Specification Rev. 1.0
Page 26 of 42
4.8 Reliability Tests
The measurement should be done after the test module has been exposed to room temperature
and humidity for one hour.
No. Item
Limit
Condition
1 Variable Vibration Test Electrical parameters should be
within specification
Freq.: 20
Hz~2 000
Hz, Acc.: 17 G to
50
G, Sweep: 8
min, 2 hours, For: XYZ
axis
2 Shock Drop Test
Drop parts on concrete from a height of
1
m for 3 times
3 Heat-Shock/
Temperature Cycling
Test
At -40
°C and 85
°C for 1 h/cycle
Total = 300 cycles
4 Temperature Humidity
Bias Test
At 60
°C, 85
% r. H., 300
h
5 Low Temperature
Storage Life Test
At -40
°C, 300
h
6 High Temperature
Storage Life Test
At 85
°C, 300
h
