manualshive.com logo in svg

Panasonic PAW-280PAH3M, Basic Installation Instructions

Looking for Basic Installation Instructions for your Panasonic PAW-280PAH3M? Look no further! Download the comprehensive user manual for this product, absolutely free, from our website. Access step-by-step guidance and get started with your Panasonic PAW-280PAH3M hassle-free.

Share
Download
background image

Basic Installation Instructions

 

Air Handling Unit Kit    

Model No. 

PAW-280PAH3M 

 

 

 

(Use QR Code for full instruction manual) 

 
Read through the Installation Instructions before you proceed with the installation. 

Please  carefully  read  the  “Safety  Precautions”.  This  booklet  mainly 

mentions  the  safety-related 

regulatory matters. Regarding the contents of the installation, please scan the matrix two-dimensional 
(2D) barcode and refer to the detailed manuals.  
Panasonic  will  accept  no  responsibility  for  any  accident  or  damage  that  occurs  because  of  such 
improper installation in any way not described in the detailed manuals. Also, malfunction caused by 
incorrect installation is not covered by the product warranty. 
 

Contents 

1. 

Safety Precautions ........................................................................................................................... 2 

2. 

Installation location ......................................................................................................................... 4 

2. 

Dimensions ...................................................................................................................................... 5 

3. 

Technical specification 

–

 AHU Kit .................................................................................................... 5 

4. 

Connection cable between outdoor and AHU-Kit ........................................................................... 6 

a. 

PZ3 / PZH3 connection wiring ..................................................................................................... 6 

b.  PZH2 connection wiring............................................................................................................... 7 

5. 

Terminal connection overview ........................................................................................................ 8 

6. 

Installation of thermistor on liquid pipe ......................................................................................... 9 

7. 

Installation of thermistor on heat exchanger pipe middle ........................................................... 10 

8. 

Installation of thermistor for suction and discharge air stream ................................................... 10 

9. 

Adjustments before system can operate ...................................................................................... 11 

a. 

If outdoor unit type PZ3 / PZH3 / PZH2 is connected ............................................................... 11 

b.  The basic steps are as follows: .................................................................................................. 11 

c. 

Adjust the settings ..................................................................................................................... 11 

10. 

AHU-Kit Wiring lay out .............................................................................................................. 14 

11. 

Parts location overview ............................................................................................................. 14 

Please Read Before Starting 

These  basic  instructions  are  typical  for  most  installation  sites.  Please  refer  to  the  full  Installation 
Instructions  for  extended  information!  If  you  require  help  for  a  special  problem,  contact  our 
sales/service outlet or your certified dealer for additional instructions. 

Summary of Contents for PAW-280PAH3M

















Reviews:

No comments

Related manuals for PAW-280PAH3M

Trane AHUMD200A 00BA Series Installer'S Manual preview
AHUMD200A 00BA Series
Brand: Trane Pages: 4
DOSPEL luna 200 Maintenance Manual preview
luna 200
Brand: DOSPEL Pages: 15
Salda RIRS EKO 3.0 400 VEL Mounting And Installation Instruction preview
RIRS EKO 3.0 400 VEL
Brand: Salda Pages: 28
Midea DLFLAA Installation Instructions Manual preview
DLFLAA
Brand: Midea Pages: 26

Brands by name

Popular brands

Load more brands