13
No. Instruction
Image
6
You will be back in the same screen as indicated in
Number 3.
Press enter again and
“Code no.”
will be
highlighted.
In this state keep pressing enter button for 2
seconds or more and you will be directly in the 6
digit
“Code no.”
where you can select the desired
code easily by altering each digit one by one, which
is much faster than scrolling up/down the whole
code list:
7
After altering one digit with up/down arrows, press
enter and you can set the next digit. In this way
select code
“
000303
”
:
8
After having set
“
000303
”
under
“Code no.”
press
enter again and
“Set data”
will become highlighted.
With the up/down arrows alter to
“
0002
”
and
confirm with enter:
9
When you have completed the detailed code
settings, press
“List b
utton
”
and you will be
prompted to
“Exit detailed settings and restart”.
Press enter to confirm
“YES”
, and the controller will
restart.
The system will address itself automatically during restart. Once it is finished and the display returns
to the standard initial screen, you may now operate the system as normal.