Panasonic PC8, Installation Manual

Panasonic Protocol Converter Manual V10.2  5Mar 09  

Page 8/16 

VCL TP protocol 

Function Panasonic 

Procedure 

Program preset 1 – 32 

As normal 

Goto preset 1 – 32 

As normal 

Enable Privacy zone 100 – 127 

Program preset 64 
Followed by goto preset 1 – 28 (1 = zone 100) 

Disable Privacy zone 100 – 127 

Program preset 63 
Followed by goto preset 1 – 28 (1 = zone 100) 

Define Preset Patrol – START 

Program preset 62 
Followed by 3 preset commands per preset position 
PRESET NUMBER - GOTO PRESET 1-32  
SPEED - GOTO PRESET 1-63, 64 = fastest 
DWELL – GOTO PRESET 1-64 (x 2 seconds) 

Define Preset Patrol – STOP 

Program preset 61 

Start Preset Patrol 

AUTOPAN 

Path 5 LEARN start 

PATROL LEARN or Program preset 60 
Use joystick to move dome around required path 

Path 5 LEARN stop 

PATROL STOP or Program preset 59 

Path 5 PLAYBACK 

PATROL PLAY 

Preset positions 

The unit supports 32 preset positions per dome. Use the standard Panasonic method to 
program a preset and also to goto preset. 
 

Preset Tour 1 

The dome’s preset tour 1 can be defined as follows 
PROGRAM PRESET 62 : the converter is now waiting for 3 preset calls per position 
GOTO PRESET 1-32 : this is the preset position that is being programmed 
GOTO PRESET 1-64 : this is the speed, 1-63 are increasing speeds and 64 is maximum 
GOTO PRESET 1-64 : this is the dwell in 2 seconds to stay at the preset position 
PROGRAM PRESET 61 : this is the end of the tour definition 
 
Example presets 1,2,8,16 
PROGRAM PRESET 62 – start definition 
GOTO PRESET 1 – preset position 1 
GOTO PRESET 64 – maximum speed 
GOTO PRESET 10 – 20 second dwell 
 
GOTO PRESET 2 – preset position 2 
GOTO PRESET 20 – slowish speed 
GOTO PRESET 15 – 30 second dwell 
 
GOTO PRESET 8 – preset position 8 
GOTO PRESET 1 – very slow speed 
GOTO PRESET 2 – 4 second dwell 
 
GOTO PRESET 16 – preset position 16 
GOTO PRESET 63 – fast speed 
GOTO PRESET 1 – 2 second dwell 
 
PROGRAM PRESET 61 – end definition