Panasonic PN25168-NZ Installation Manual Download

Page: 1 / 17

Installation Guide



Thank you for purchasing our product.



This document provides important information about safe and proper
operations of this Ethernet Switch.



Please read the

"Important Safety Instructions" on pages from 3 to 5



Any problems or damages resulting from disassembly of this Ethernet
Switch by customers are not covered by the warranty.

I0217-50822 Printed in Japan

GA-A

PN25168-TH

PN25168-MY

PN25168-ID

PN25168-SG

PN25168-NZ

Model No.



The instruction manuals (Web Version), latest firmware and
SDN application (ZEQUO assist Plus) can be downloaded
from the following URL.

https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©

Panasonic Electric Works Networks Co.,Ltd.

Panasonic Electric Works Networks Co.,Ltd. 2022

Summary of Contents for PN25168-NZ


















Search results

Summary of Contents for PN25168-NZ

Reviews:

Related manuals for PN25168-NZ

Brands by name

Popular brands

Panasonic PN25168-NZ, Installation Manual

Search results

Summary of Contents for PN25168-NZ

Reviews:

Related manuals for PN25168-NZ

Brands by name

Popular brands