background image

11

Power LED

Collision LED 

PoE limit LED  

Status/ECO mode LED 

Power supply mode LED          
GIGA mode LED

Speed modeLED

DUPLEX mode LED

Loop History mode LED

LED DISPLAY CHANGE BUTTON

See Table 1 (next page) 
for the LED indications 
of each port.

 POWER LED (Power)

Green Light 

: Power is ON.

Off 

: Power is OFF.

 ANY COL. LED (Collision)

Orange Light 

: During half-duplex operation, packet collision is occurring in 

either port.

 PoE LIM. LED (PoE limit)

Off 

: Supplying power in the range from 0 to 117 W. 

Green Light 

: Supplying power in the range from 117 to 124 W. 

Orange Blink   

: A single port's power supply is exceeding the upper limit, or 

the total power supply of the Switching Hub is exceeding 124 W. 

 STATUS/ECO LED (Status/ECO mode)

Green Light 

: Operating in status mode.

Green Blink 

: Operating in ECO mode.

All Port LEDs (left) are turned off.

Orange Light 

: Starting

Orange Blink 

: Malfunction (Contact the seller.)

 PoE LED (Power supply mode)

Green Light 

: Operating in power supply mode.

 GIGA LED (GIGA mode)

Green Light 

: Operating in GIGA mode.

 100M LED (Speed mode)

Green Light 

: Operating in Speed mode.

 FULL LED (DUPLEX mode)

Green Light 

: Operating in DUPLEX mode.

 LOOP HISTORY LED (Loop History mode)

Green Light 

: Operating in Loop History mode.

Green Blink 

: Loop is occurring, or occurred within 

the last 3 days.

Summary of Contents for PN25249-ID




















Reviews: