192
Available commands are listed below.
S Switch the port to display the values.
Press "S." The command prompt changes to "Select Port number>." Enter the
port number for which you wish to display values.
N Display the values of the next port.
Press "N." The screen displays the counter values of the next port.
P Display the values of the previous port.
Press "P." The screen displays the counter values of the previous port.
U Switch to the counter display from booting.
Press "U." The counter display changes to the one from the system start.
R Switch to the counter display from resetting the counters.
Press "R." The counter display changes to the one from the counter reset.
F Set the counter refresh mode.
Press "F." The command prompt changes to "1 for start to refresh,2 for set
refresh rate." Press "1" to cancel the automatic refreshing. Press "2" to change
the refresh interval. If you press "2," the command prompt changes to "Input
refresh time>." Enter an integer number between 5 and 600 (seconds).
Q Return to the parent menu.
The counters are described below.
TxReqId
Displays the number of EAP Request Identity frames transferred
from the switch.
TxReq
Displays the number of EAP Request frames transferred from the
switch.
TxTotal
Displays the total number of all the types of EAP frames transferred
from the switch.
RxStart
Displays the number of EAPOL Start frames received from the
supplicant.
RxLogoff
Displays the number of EAPOL Logoff frames received from the
supplicant.
RxRespId
Displays the number of EAP Response Identity frames received from
the supplicant.
RxResp
Displays the number of EAP Response frames received from the
supplicant.
RxInvalid
Displays the number of frames whose frame types cannot be
recognized among EAPOL frames received from the supplicant.
RxLenError
Displays the number of frames whose fields indicating the length of
the packet body are disabled among EAPOL frames received from
the supplicant.
RxTotal
Displays the total number of frames among EAP frames received
from the supplicant.
RxVersion
Displays the number of frames that were received in the form of
IEEE802.1X version 1 among EAP frames received from the
supplicant.
LastRxSrcMac
Displays the source MAC address of the last EAPOL frame received by
this switch.
