202
Screen Description
Primary Database
Displays the reference for the first authentication.
RADIUS
The reference is the RADIUS server.
Local
The reference is the local user database. (Factory
default setting)
Secondary
Database
Displays the reference for authentication that failed in the Primary
Database.
RADIUS
The reference is the RADIUS server.
Local
The reference is the local user database.
None
The terminal is authorized without authentication.
(Factory default setting)
Auth Fail Action
Displays the action when authentication fails in the Primary
Database.
Stop
Stops the authentication process without
performing authentication in the Secondary
Database. (Factory default setting)
Only when the Primary Database is RADIUS and a
RADIUS server timeout occurs, the process moves to
the Secondary Database.
Secondary DB Performs authentication in the Secondary Database.
Auth Fail Block
Time
Displays the time (seconds) before accepting the authentication
process again after an authentication failure.
(Factory default setting: 60)
Virtual IP Address
Displays the Virtual IP Address used on the WEB authentication login
screen.
HTTP Port Number Displays the TCP port number used on the WEB authentication login
screen.
(Factory default setting: 80)
Redirect URL
Displays the URL to be redirected after WEB authentication succeeds.
Note: The Virtual IP Address needs to be set for WEB authentication.
Note: Specify the IP address of a network different from the one actually
connected, such as 1.1.1.1, for the Virtual IP Address.
Note: If a WEB authentication target host is using a fixed IP address, the
host needs to be able to communicate with the default gateway
before authentication.
It is recommended that you normally use the DHCP client and also
use the temporary DHCP server.
Note: If the HTTP Port Number is changed, the TCP port number on the
WEB setting screen is also changed.
