111
3.7. Time Configuration
Configure the time setting and time synchronization by SNTP in "Global configuration mode."
Confirm the configuration information by executing the "show sntp" command in "Privileged mode."
Command to show the SNTP configuration
M24eG# show
sntp
Command to manually set the time
M24eG(config)#
sntp clocktime <date> <time>
Command to enable SNTP
M24eG(config)# sntp
enable
Command to disable SNTP
M24eG(config)# sntp
disable
Command to set the SNTP server IP address
M24eG(config)#
sntp server <ip-address>
Command to set the interval of SNTP time acquisition
M24eG(config)#
sntp polling-interval <min>
Command to enable SNTP daylight saving
M24eG(config)# sntp
daylight-saving
Command to disable SNTP daylight saving
M24eG(config)#
no sntp daylight-saving
Command to set the SNTP time zone
M24eG(config)#
sntp timezone [<location> ]
Command to reacquire time
M24eG(config)# sntp
update