34
<Command Entry Example>
An example of executing the command to show the SNMP information is shown below.
Fig. 3-3-1 Example of executing the command to show the SNMP information
(1) SNMP Agent
Shows the SNMP agent settings.
Enabled
The SNMP agent is enabled.
Disabled
The SNMP agent is disabled.
M24eG> enable
M24eG# show snmp
SNMP Agent: Disabled
SNMP Manager List:
No. Status IP Address Access SNMP Community String
---- -------- --------------- ------ --------------------------------
1 Enabled 0.0.0.0 ro public
2 Enabled 0.0.0.0 rw private
3 Disabled 0.0.0.0
4 Disabled 0.0.0.0
5 Disabled 0.0.0.0
6 Disabled 0.0.0.0
7 Disabled 0.0.0.0
8 Disabled 0.0.0.0
9 Disabled 0.0.0.0
10 Disabled 0.0.0.0
Trap Reciever List:
No. Status IP Address Version Trap Community String
---- -------- --------------- ------- ------------------------------
1 Disabled 0.0.0.0
2 Disabled 0.0.0.0
3 Disabled 0.0.0.0
4 Disabled 0.0.0.0
5 Disabled 0.0.0.0
6 Disabled 0.0.0.0
7 Disabled 0.0.0.0
8 Disabled 0.0.0.0
9 Disabled 0.0.0.0
10 Disabled 0.0.0.0
Individual Trap
SNMP Authentication Failure: Disabled
Login Failure : Disabled
Enable Link Up/Down Port : all
M24eG#
(1)
(2)
(3)
(9)
(6)
(7)
(5)
(8)
(4)
(13)
(10)
(11)
(12)
(14)
(15)
(16)
(17)