131
Available commands are listed below.
N Show the next page.
Press "N." The screen shows the next page.
P
Show the previous page.
Press "P." The screen shows the previous page.
C Create a classifier.
Press "C." The Create Classifier Configuration Menu opens. For the Create
Classifier Configuration Menu, refer to the next section (4.7.4.b).
D Delete a classifier.
Press "D." The command prompt changes to "Please enter classifier index>." Enter
an index of the classifier to be deleted with a value of 1 to 65535.
O Modify classifier configuration.
Press "O." The Modify Classifier Menu opens. Set (modify) the configuration in the
same as the Create Classifier Configuration Menu.
M Show additional information on a classifier.
Press "M" to display information on source MAC address, destination MAC
address, 802.1p, VLAN ID, TCP SYN Flag, and ICMP type.
S
Show detailed information on a classifier.
Press "S" to display information on source MAC address, destination MAC
address, VLAN ID, source IP address, destination IP address, 802.1p priority,
DSCP, protocol type, TCP/UDP source port number, TCP/UDP destination port
number, TCP SYN Flag, and ICMP type.
Q Return to the previous menu.
Note:
In this Switching Hub, the maximum number of L4 portlist which is
available in src-port or dst-port is by 16.
