135
Press "M." The command prompt changes to "Enter ICMP type>." Enter an ICMP
type with a value of 0 to 18.
Y Set a TCP SYN flag to be filtered. (* Protocol needs to be set to TCP.)
Press "Y." The command prompt changes to "Set TCP SYN flag (Y/N)>." Press "Y"
for filter with a TCP SYN flag. Press "Y" for no filtering or to remove filter. If
filtered, True is displayed. If not filtered, False is displayed.
6
Set the source IPv6 address to be filtered.
Press "6." The command prompt changes to "Enter source IPv6 address>." Enter a
source IPv6 address. Then, the command prompt changes to "Enter source IPv6
address mask length>." Enter a length (bits) of address mask.
N Set a destination IPv6 address to be filtered.
Press "N." The command prompt changes to "Enter destination IPv6 address>."
Enter a destination IPv6 address. Then, the command prompt changes to "Enter
destination IPv6 address mask length>." Enter a length (bits) of address mask.
F
Set a IPv6 DSCP value to be filtered.
Press "F." The command prompt changes to "Enter DSCP6 value (0-63)>." Enter a
DSCP value of 0 to 63.
A Apply the setting. If not applied here, the setting will be discarded.
Q Return to the previous menu.
