164
4.7.7.b. Authentication Log
On the Authentication Configuration, pressing "L" opens the
Authentication Log screen, as shown in Fig. 4-7-25-2. On this screen, you can
display the authentication log of an event that occurred in the
authentication process.
Fig. 4-7-25-2 Authentication Log
Screen Description
Total Auth Logs
Displays the total number of authentication events recorded in the
authentication status table.
The maximum number is 512.
Log Save Interval
Displays the waiting time in minutes until an authentication log that
occurred is written to the switch.
If the switch is restarted or turned off when no log is being written, an
authentication log that has been recorded at that point is flushed.
(Factory default setting: 60)
ID
Displays the authentication log IDs in ascending order.
Date/Time
Displays the date and time when the authentication event occurred.
Authentication
Event
Displays the authentication event.
PN28160i Local Management System
Authentication Configuration -> Authentication Log
Total Auth Logs : 0 Log Save Interval : 60 minutes
ID Date/Time Authentication Event
--- ------------------- ----------------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [C]lear Auth Logs Set Log Flushing [I]nterval
[P]revious Page [J]ump to Log ID [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
