203
Available commands are listed below.
P
Set the Primary Database.
Press "P." The command prompt changes to "Select the primary database (R/L)>."
Press "R" to use the RADIUS server or "L" to use the local user database.
S
Set the Secondary Database.
Press "S." The command prompt changes to "Select the secondary database
(R/L/N)>." Press "R" to use the RADIUS server, "L" to use the local user database, or
"N" to allow authentication.
F
Set the Auth Fail Action.
Press "F." The command prompt changes to "Enter Auth Fail Action for Primary
Database (D/P)>." To performing authentication in the Secondary Database, press
"D." Otherwise, press "P."
B Set the Auth Fail Block Time.
Press "B." The command prompt changes to "Enter auth fail block time >." Enter
the waiting time before restarting authentication with an integer between 1 and
65535 (seconds).
I
Set the Virtual IP Address on the WEB authentication login screen.
Press "I." The command prompt changes to "Enter Virtual IP address >." Enter an IP
address.
H Set the TCP port on the WEB authentication login screen.
Press "H." The command prompt changes to "Enter HTTP port number
(1-65535)>." Enter the TCP port number on the WEB authentication login screen
with an integer between 1 and 65535.
U Set the redirect URL.
Press "U." The command prompt changes to "Enter redirect URL >." Enter the
redirected URL after authentication starting with "http://."
W Move to the WEB Page Contents Config.
D Move to the Temporary DHCP Server Config.
Q Return to the parent menu.
