241
4.9.4. Exception Handler
On the Switch Tools Configuration Menu, pressing "x" opens the Exception
Handler screen, as shown in Fig. 4-9-6. On this screen, you can configure the
exception handling operations.
Fig. 4-9-6 Exception Handler
Screen Description
Exception Handler Shows the status of exception handler.
The factory default setting is "Disabled."
Enabled
Exception handler is enabled.
Disabled
Exception handler is disabled.
Exception Handler
Mode
Shows the method of exception handler.
Debug Message
When the Switching Hub detects exception
handler, a debug message is displayed on the
console screen.
System Reboot
When the Switching Hub detects exception
handler, the system automatically starts
rebooting.
PN28160i Local Management System
Switch Tools Configuration -> Exception Handler
Exception Handler: Disabled
Exception Handler Mode: Debug Message
-------------------------------- <COMMAND> -----------------------------------
Enable/Disable E[x]ception Handler
Set Exception Handler [M]ode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
