69
4.6.3.m. SNMP Trap Receiver Configuration
On the SNMP Configuration Menu, pressing "T" opens the SNMP Trap
Receiver Configuration Menu, as shown in Fig. 4-6-18. On this screen, you can
configure the SNMP trap receiver settings.
Fig. 4-6-18 SNMP Trap Receiver Configuration
Screen Description
Trap
Receiver List:
Shows the IP address and the community name for the current trap
receiver.
No.
Shows the entry number for the trap receiver.
Status
Shows the trap sending setting.
Enabled
Sends traps.
Disabled
Does not send traps.
Type
Shows the trap type.
v1
Sends SNMP v1 traps.
v2c
Sends SNMP v2c traps.
IP Address
Shows the IP address of a trap receiver.
PN28160i Local Management System
SNMP Configuration -> SNMP Trap Receiver Configuration Menu
Trap Receiver List:
No. Status Type IP Address Community
--- -------- ---- --------------- --------------------------------
1 Disabled v1 0.0.0.0
2 Disabled v1 0.0.0.0
3 Disabled v1 0.0.0.0
4 Disabled v1 0.0.0.0
5 Disabled v1 0.0.0.0
6 Disabled v1 0.0.0.0
7 Disabled v1 0.0.0.0
8 Disabled v1 0.0.0.0
9 Disabled v1 0.0.0.0
10 Disabled v1 0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set Receiver [S]tatus Set Receiver [I]P In[d]ividual Trap Config
Set Trap [T]ype Set Receiver [C]ommunity Set Receiver I[P]v6
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
