83
Available commands are listed below.
N Show the next page.
Press "N." The screen shows the next port.
P
Show the previous page.
Press "P." The screen shows the previous port.
S
Set the MNO series power saving mode.
Press "S." The command prompt changes to "Select port number to be changed>."
Enter a port number you wish to change. Press "0" to change the settings of all
ports at a time. Then, the command prompt changes to "Enter Power Saving mode
for port (F/H/D)>." Press "E" to enable the mode. Press "D" to disable it. Press "H" to
enable the power saving mode of giving priority to connectivity with another
device. As the change is applied, the display on the screen is updated
automatically.
E
An EEE can be assigned to each port.
Press "E." The command prompt changes to "Select port number to be changed>."
Enter a port number you wish to change. Press "0" to change the settings of all
ports at a time. Then, the command prompt changes to " Enable, Disable for
Energy Efficient Ethernet(EEE 802.3az) (E/D)>." Press "E" to enable the function.
Press "D" to disable it. As the change is applied, the display on the screen is updated
automatically.
Q Return to the previous menu.
