132
4.7.4.b. Create Classifier Configuration Menu
On the Classifier Configuration Menu, pressing "C" opens the Create
Classifier Configuration Menu, as shown in Fig. 4-7-10. On this screen, you
can create a classifier.
Fig. 4-7-10 Create Classifier Configuration Menu
PN28160K Local Management System
Classifier Configuration -> Create Classifier Configuration Menu
Classifier Index :
VLAN ID : 802.1p Priority : DSCP : IPv6 DSCP :
Protocol: TCP SYN Flag : ICMP Type :
Source MAC Address : Source MAC Mask Length :
Destination MAC Address : Destination MAC Mask Length:
Source IP Address : Source IP Mask Length :
Destination IP Address : Destination IP Mask Length :
Source IPv6 Address : PLen :
Destination IPv6 Address: PLen :
Source Layer 4 Port : Destination Layer 4 Port :
-------------------------------- <COMMAND> -----------------------------------
[C]lassifier Index S[o]urce IP Address
[S]ource MAC Address D[e]stination IP Address
[D]estination MAC Address Source IPv[6] Address
[V]LAN ID Desti[n]ation IPv6 Address
802.1p Pr[i]ority So[u]rce Layer 4 Port
DSC[P] Des[t]ination Layer 4 Port
P[r]otocol DSCP [F]or IPv6
TCP S[Y]N Flag [A]pply
IC[M]P Type [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
