184
Screen Description
NAS ID
Displays the authentication ID (NAS Identifier).
Port No
Displays the port number.
Number of
Supplicant
Displays the number of supplicants that can be authenticated.
Operational
Control Direction
Displays the packet control status when the terminal is not
authorized.
(Reflects the settings by Administrative Control Direction below.)
Both
Without authentication, this switch does not
transmit/receive packets from the applicable port.
In
Without authentication, this switch does not receive
packets from the applicable port.
Administrative
Control Direction
Displays the packet control method when the terminal is not
authorized.
Both
Without authentication, this switch does not
transmit/receive packets from the applicable port.
In
Without authentication, this switch does not receive
packets from the applicable port.
Transmit Period
The number of seconds to wait before requesting the supplicant to
reattempt authentication.
The factory default setting is 30 seconds.
Max Request
The maximum number of times of retransmitting an authentication
request. The factory default setting is 2.
Supplicant
Timeout
Displays the timeout for the client.
The factory default setting is 30 seconds.
Quiet Period
The number of seconds to wait before reattempting a failed
authentication.
The factory default setting is 60 seconds.
Serv Timeout
Displays the timeout for the authentication server.
The factory default setting is 30 seconds.
Re-auth Period
Displays the re-authentication time interval. The factory default
setting is 3600 seconds.
Force Auth MAC
Timeout
Displays the re-authentication interval of the force authorized MAC
address.
The factory default setting is 3600 seconds.
Re-auth Timer
Mode
Displays the reference for the re-authentication time interval.
The factory default setting is RADIUS.
RADIUS
Preferably uses the value reported from the RADIUS
server.
Local
Uses the Re-auth Period value.
Re-auth Timer
Mode
Displays the reference for the re-authentication time interval.
The factory default setting is RADIUS.
RADIUS
Preferably uses the value reported from the RADIUS
server.
Local
Uses the Re-auth Period value.
Supplicant MAC
Addr
Displays the MAC address of the supplicant.
Type
Displays the authentication type.
Dynamic
Indicates that the terminal was dynamically
authorized by the RADIUS server.
