119
4.6.6.
Storm Control Configuration Menu
On the Advanced Switch Configuration Menu, pressing "O" opens the Storm Con
-
trol Configuration Menu screen, as shown in Fig. 4-54. On this screen, you can con
-
figure the settings of storm control of unknown unicast, broadcast, and multicast.
PN28168 Local Management System
Advanced Switch Configuration -> Storm Control Configuration Menu
Port Storm Control Setting:
No. DLF Broadcast Multicast Threshold
---- --------- --------- --------- ---------
1 Disabled Disabled Disabled 0
2 Disabled Disabled Disabled 0
3 Disabled Disabled Disabled 0
4 Disabled Disabled Disabled 0
5 Disabled Disabled Disabled 0
6 Disabled Disabled Disabled 0
7 Disabled Disabled Disabled 0
8 Disabled Disabled Disabled 0
9 Disabled Disabled Disabled 0
10 Disabled Disabled Disabled 0
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set [B]roadcast Status [Q]uit to previous menu
[P]revious Page Set [M]ulticast Status
Set [D]LF Status Set [T]hreshold Value
Command>
Enter the character in square brackets to select option
Fig. 4-54 Storm Control Configuration
Screen Description
DLF:
Enables/disables the unknown unicast storm control.
Enabled
The unknown unicast storm control is enabled.
Disabled
The unknown unicast storm control is disabled. (Factory default set
-
ting)
Broadcast:
Enables/disables the broadcast storm control.
Enabled
The broadcast storm control is enabled.
Disabled
The broadcast storm control is disabled. (Factory default setting)
Multicast:
Enables/disables the multicast storm control.
Enabled
The multicast storm control is enabled.
Disabled
The multicast storm control is disabled. (Factory default setting)
Threshold:
Displays the threshold of the number of packets (Packet Per Second).
