82
4.5.11.a. Display of Neighbor Table
On the LLDP Configuration, pressing "E" opens the Neighbor Table screen, as
shown in Fig. 4-32. On this screen, you can display the Neighbor Table.
PN28168 Local Management System
LLDP Configuration -> Neighbor Table
Total Neighbors: 1
No Chassis ID Port ID Mgmt IP Address Port
--- ----------------- ----------------- --------------- ----
1 xx:xx:xx:xx:xx:xx xx:xx:xx:xx:xx:xx 0.0.0.0 1
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [D]etail
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-32 Display of Neighbor Table
Screen Description
Total Neighbors
Displays the number of entries recorded in the Neighbor Table.
No
Displays the entry number.
Chassis ID
Displays the Chassis ID for each entry.
Port ID
Displays the port ID for each entry.
Mgmt IP Address Displays the IP address for each entry.
Port
Displays the port number that received LLDP frames.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
D
Display detailed information of each entry.
Press "D" to display detailed information of the entry. For configuration details, refer to the
next section (4.5.11.b).
Q
Return to the parent menu.
