187
4.7.7.k. Force Authorized MAC Configuration Menu
On the 802.1x Access Control Configuration, pressing "F" opens the Force
Authorized MAC Configuration Menu screen, as shown in Fig. 4-7-25-11. On
this screen, you can set the MAC address of a device to be
authorized/unauthorized without IEEE802.1X access control.
Fig. 4-7-25-11 Force Authorized MAC Configuration Menu
Screen Description
MAC Address
Displays the MAC address of the device to be forcibly authorized.
Mask
Displays the mask length of the registered MAC address.
Auth Status
Displays the force authorization type.
Authorized
The authentication type is force authorized.
Unauthorized
The authentication type is force unauthorized.
Port List
Displays the target port list.
PN28240i Local Management System
802.1x Access Control Configuration -> Force Authorized MAC Configuration Menu
MAC Address Mask Auth Status Port List
----------------- ---- ------------ -------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Add/Del MAC [A]ddr Sea[r]ch MAC Address
Pre[v]ious Page Set [M]ask Bit
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
