249
Screen Description
Entry
Shows the event number.
Time
Shows the time when the event occurred. If the time is not set, the
accumulated running time since boot is shown.
Event
Shows the description of the event occurred to the Switching Hub.
Available commands are listed below.
N Show the next page.
Press "N." The screen shows the next page.
P
Show the previous page.
Press "P." The screen shows the previous page.
C Clear all logs.
Press "C" to clear all logs.
Q Return to the previous menu.
System logs are as follows.
Counter
Error
Received error packets. (CRC/Align Errors)
Indicates that receiving CRC/Align error packet.
Received the error packets. (Undersize Pkts)
Indicates that receiving the packet under 64 Bytes.
Received the error packets. (Oversize Pkts)
Indicates that receiving the packet over 1518 Bytes.
Received the error packets. (Fragments)
Indicates that receiving Fragment frame.
Received the error packets. (Jabbers)
Indicates that receiving Jabber frame.
Received the error packets. (Collisions)
Indicates the detecting Collision.
Cannot send the packets. (Ping)
Indicate that cannot send the packet.
Cannot send the packets. (Telnet)
Indicate that cannot send the packet.
Cannot send the packets. (SNMP)
Indicate that cannot send the packet.
Cannot send the packets. (Syslog)
Indicate that cannot send the packet.
Cannot send the packets. (RADIUS)
Indicate that cannot send the packet.
Cannot send the packets. (SSH)
Indicate that cannot send the packet.
Cannot send the packets. (SNTP)
Indicate that cannot send the packet.
