55
4.6.3.f. Modify SNMP User Configuration
On the SNMP User Configuration Menu, pressing "O" opens the Modify
SNMP User Configuration Menu, as shown in Fig. 4-6-11. On this screen, you
can configure the SNMP User settings.
Fig. 4-6-11 Modify SNMP User
Screen Description
Index
Shows the entry number on the SNMP User List.
User Name
Shows the SNMP user name.
Group Name
Shows the group of the SNMP user.
READ_VIEW
Shows the name of view to read.
WRITE_VIEW
Shows the name of view to write.
NOTIFY_VIEW
Shows the name of view to notify.
Authentication
Shows the authentication method.
Auth.key
Shows the authentication key.
Privilege
Shows the encryption scheme.
Privilege Key
Shows the encryption key.
PN28240i Local Management System
SNMP User Configuration Menu -> Modify SNMP User Configuration Menu
Index : 2
User Name : test
Group Name : test
READ_VIEW : test
WRITE_VIEW : test
NOTIFY_VIEW : test
Authentication : MD5
Auth. Key : 7b954b5c52218eebd6cdd7083a6d2d30
Privilege : None
Privilege Key : None
IP address : 0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set [U]ser Name Set [G]roup Name Set Auth. [K]ey
Set [A]uthentication Set [P]riv. Key Set P[r]ivilege
Set [I]P address [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
