91
Available commands are listed below.
V
Set the VLAN ID (VLAN Identifier).
Press "V." The command prompt changes to "Set VLAN ID->Enter VLAN ID >." Enter a new
VLAN ID.
N
Set the name of the VLAN.
Press "N." The command prompt changes to "Enter VLAN name >." Enter the VLAN name in
30 characters or less.
P
Set the VLAN members.
Press "P." The command prompt changes to "Enter egress port number >." Enter a port num
-
ber. When entering two or more port numbers, separate them with a comma without a
space, or use a hyphen for consecutive numbers.
Q
Return to the parent menu.
Note:
After configuring VLAN settings, be sure to apply them by pressing "A." If you
press "Q" without applying them, the settings are canceled and a VLAN is not
created.
