115
4.6.5.b.
Scheduling Method
On the Quality of Service Configuration Menu, pressing "C" opens the Scheduling
Method screen, as shown in Fig. 4-51. On this screen, you can configure the sched
-
uling method settings.
PN28248 Local Management System
Quality of Service Configuration -> Scheduling Method
Scheduling Method: Strict
Traffic Class Weight
------------- ------
0 1
1 2
2 3
3 4
-------------------------------- <COMMAND> -----------------------------------
[S]et Scheduling Method
Set Traffic Class-Weight [M]apping
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-51 Scheduling Method
Screen Description
Scheduling Method:
Displays the scheduling method of the QoS function.
Strict
PQ: Strict priority queuing (Factory default setting)
Weighted
Round Robin
WRR: Weighted round robin scheduling
Traffic Class
Displays the priority of packets.
Weight
Displays the weight to distribute packets.
Available commands are listed below.
S
Select the scheduling method of the QoS function.
Press "S" to change the command prompt to "Select scheduling method (S/W)>." Enter "S"
to use Strict Priority Queueing or "W" to use Weighted Round Robin.
M
Set the weight to priority (Traffic Class).
1. Press "M" to change the command prompt to "Enter traffic class>." Enter a Traffic Class
(0 to 3).
2. Then, the command prompt changes to "Enter weight for traffic class #>." Enter weight
(1 to 127).
Q
Return to the parent menu.
