152
4.6.10.a. RRP Domain Creation Menu
On the Ring Redundant Protocol Configuration Menu, pressing "C" opens the RRP
Domain Creation Menu screen as shown in Fig. 4-71. On the screen, you can cre
-
ate a RRP domain.
PN28248 Local Management System
RRP Management -> RRP Domain Creation Menu
RRP Domain Name : RRP Node Type :
Primary Port :
Secondary Port :
Polling Interval : 1 Fail Period : 2
Control VLAN :
Data VLAN :
-------------------------------- <COMMAND> -----------------------------------
Set RRP Domain [N]ame Set Node [T]ype
Set [P]rimary Port Set [S]econdary Port
Set P[o]lling Interval Set [F]ail Period
Set [C]ontrol VLAN Set [D]ata VLAN
[A]pply [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-71 RRP Domain Creation Menu
Screen Description
RRP Domain
Name
Displays the domain name.
RRP Node Type
Displays the node role.
Master
Indicates that the Switching Hub controls the ring operation.
Each domain has only one master node.
Transit
Indicates that the Switching Hub is not a master node.
Primary Port
Displays the primary port.
Secondary Port
Displays the secondary port.
Polling Interval
Displays the polling interval.
Fail Period
Displays the timeout for polling.
Control VLAN
Displays the control VLAN ID.
Data VLAN
Displays the data VLAN ID.
