160
4.6.11.a. Loop History Information
On the Loop Detection Configuration Menu, pressing "I" opens the Loop History
Information screen, as shown in Fig. 4-75. On this screen, you can view the loop
detection date and time and a list of event information.
PN28248 Local Management System
Loop Detection Configuration Menu -> Loop History Information
Entry Time(YYYY/MM/DD HH:MM:SS) Event
----- ------------------------- ---------------------------------------------
1 2001/01/01 00:00:33 The loop detected between port 1 and 4
2 2001/01/01 00:01:33 Port 1 auto recovery
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[C]lear Loop Detection History
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-75 Loop History Information View
Screen Description
Entry
Displays the event number.
Time
Displays the time when the event occurred, or the time accumulated after boot if the
clock is not set.
Event
Displays the description of the event caused to the Switching Hub.
The loop detected on portX.
A loop was detected and connection was blocked on a
Switching Hub in Port X.
The loop detected between
portX and portY.
A loop was detected and connection was blocked on a
Switching Hub between Port X and Port Y.
PortX auto recovery.
The blocked Port X was automatically recovered.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
C
Delete the history information of the Loop History function.
Q
Return to the parent menu.
