174
4.8.4.
Exception Handler
On the Switch Tools Configuration Menu, pressing "x" opens the Exception Han
-
dler screen as shown in Fig. 4-84. On this screen, you can configure the exception
handling operations.
PN28248 Local Management System
Switch Tools Configuration -> Exception Handler
Exception Handler: Disabled
Exception Handler Mode: Debug Message
-------------------------------- <COMMAND> -----------------------------------
Enable/Disable E[x]ception Handler
Set Exception Handler [M]ode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-84 Exception Handler Configuration
Screen Description
Exception Handler
Displays the exception handling function status.
"Disabled" is the factory default setting.
Enabled
The exception handler is enabled.
Disabled
The exception handler is disabled.
Exception Handler Mode Displays the exception handling method.
"Debug Message" is the factory default setting.
Debug Message
Outputs a debug message to the console when
exception handling is detected.
System Reboot
Automatically reboots when exception handling
is detected.
Debug Message and
System Reboot
Outputs a debug message to the console and
then automatically reboots when exception han
-
dling is detected.
