176
4.8.5.
Ping Execution
On the Switch Tools Configuration Menu, pressing "P" opens the Ping Execution
screen as shown in Fig. 4-85. On this screen, you can execute the ping command
from the Switching Hub to confirm communications with connected terminals and
other devices.
PN28248 Local Management System
Switch Tools Configuration -> Ping Execution
Target IP Address: 0.0.0.0
Number of Requests: 10
Timeout Value: 3 Sec.
=============== Result ===============
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address [E]xecute Ping
Set [N]umber of Requests [S]top Ping
Set [T]imeout Value [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-85 Ping Execution
Screen Description
Target IP Address
Displays the IP address of the target of the ping.
The factory default setting is "0.0.0.0."
Number of Request
Displays the number of times of ping. The factory default setting is 10 times.
Timeout Value
Displays the time before timeout occurs. The factory default setting is 3 sec
-
onds.
Result
Displays the ping result.
