41
4.5.3.a.
SNMP Management Configuration
On the SNMP Configuration Menu, pressing "M" opens the SNMP Management
Configuration Menu screen, as shown in Fig. 4-11. On this screen, you can config
-
ure the SNMP manager settings.
PN28248 Local Management System
SNMP Configuration -> SNMP Management Configuration Menu
SNMP Manager List:
No. Status Privilege IP Address Community
---- -------- ----------- --------------- ----------------------------
1 Enabled Read-Write 0.0.0.0 private
2 Enabled Read-Only 0.0.0.0 public
3 Disabled Read-Only 0.0.0.0
4 Disabled Read-Only 0.0.0.0
5 Disabled Read-Only 0.0.0.0
6 Disabled Read-Only 0.0.0.0
7 Disabled Read-Only 0.0.0.0
8 Disabled Read-Only 0.0.0.0
9 Disabled Read-Only 0.0.0.0
10 Disabled Read-Only 0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set Manager [S]tatus Set Manager [I]P [Q]uit to previous menu
Set Manager P[r]ivilege Set Manager [C]ommunity
Command>
Enter the character in square brackets to select option
Fig. 4-11 SNMP Management Configuration
Screen Description
SNMP Manager
List:
Displays the current SNMP manager settings.
No.
Displays the entry number on the SNMP Manager List.
Status
Displays the SNMP manager status.
Enabled
The SNMP manager is enabled.
Disabled
The SNMP manager is disabled.
Privilege
Displays the access privilege of the SNMP manager.
Read-Write
Both the read and write operations are
allowed.
Read-Only
Only the read operation is allowed.
IP Address
Displays the IP address of the SNMP manager.
Community
Displays the current community name.
