7
Basic Instructions for the Use of This Product
●For inspection and/or repair, consult the retailer.
●Use commercial power supply from a wall socket, which is close and easily
accessible to this Switching Hub.
●Unplug the power cord when installing or moving this Switching Hub.
●Unplug the power cord when cleaning this Switching Hub.
●Use this Switching Hub within the specifications. Deviation could lead to mal
-
function.
●Be sure to confirm that this Switching Hub does not move or fall under the
weight of the cables when mounting with magnets.
●Connect cables while holding the Switching Hub down.
●Do not move this Switching Hub when attached to the desk. Deviation could
lead to scratches on the painted surface.
●Do not touch the metal terminal of the RJ45 connector, the modular plug of
connected twisted pair cable, or the metal terminal of the SFP extension slot. Do
not place charged objects in the proximity of them. Static electricity could lead
to equipment failure.
●Do not put the modular plug of the connected twisted pair cable on objects that
can carry static charge, such as carpet. Do not place it in the proximity. Static
electricity could lead to equipment failure.
●Do not put a strong shock, including dropping, to this Switching Hub. Deviation
could lead to equipment failure.
●Before connecting a console cable to the console port, discharge static electric
-
ity, for example by touching metal appliance (do not discharge by touching this
Switching Hub).
●Do not store and/or use this Switching Hub in the environment with the charac
-
teristics listed below.(Store and/or use this Switching Hub in the environment in
accordance with the specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications
environment.
- Strong vibration and/or strong shock.
