1.3 Accessories
11
Installation Guide (this document)
1 (*)
Rubber feet
4
Rack mount brackets (for 19-inch rack)
2
Screws (for 19-inch rack)
4
Screws (for fixing the mount brackets to the Ethernet Switch)
8
Power cord
1
* Just the PN290496-TH has 1 Installation Guide in Thai (a total of 2 guides).
[Optional accessories]
PN54022-XX 1000BASE-SX SFP Module(i)
PN54024-XX 1000BASE-LX SFP Module(i)
PN59021-XX 10GBASE-SR SFP+ Module
PN59023-XX 10GBASE-LR SFP+ Module
The XXs are identical to the intended nation of delivery codes.
Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.
1.4 Basic operation
This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Then, POWER LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode)
lights in orange, and self-diagnosis of hardware is executed.
On completion of self-diagnosis, POWER LED (Power), STATUS/ECO LED
(Status/ECO mode) and TEMP LED (Temperature sensor) light in green, and the
Ethernet Switch starts operation as a Ethernet Switch.
As this Ethernet Switch succeeds in communicating with a terminal connected to
each port, LED of the port lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, LED is not lighted.
Quantity
* For the configuration and management methods, please see the PDF version
of the Operating Instructions on Panasonic’s website.
[Power Cord]
The following power cords are supplied as per the intended nation of delivery.
Locale
Thailand
250 VAC 6 A
TIS166-2549
-
Indonesia
250 VAC 10 A
250 VAC 10 A
250 VAC 5 A
CEE7/7
BS1363
BS1363
-
13 A
5 A
Malaysia
Singapore
Product Number
PN290496-TH
PN290496-ID
PN290496-MY
PN290496-SG
250 VAC 10 A
AS/NZS 3112
-
Australia
New Zealand
PN290496-NZ
Power Cord Rating FUSE Rated Current
Plug Type
