background image

17

English

Notes on Using Wireless LAN

Wireless LAN uses radio waves in the 5 GHz bands.
Be sure to read and fully understand the following items 
before use.

Use this product indoors.

 

Using the 5 GHz-band wireless device outdoors is 

prohibited by the Radio Act.

If at all possible, avoid the use of cellular phones, TV 

sets or radios near the product.

 

Cellular phones, TV sets, radios and similar devices 

use different radio bands from the product, so 

there is no effect on wireless communication or the 

transmission and reception of these devices. However, 

radio waves from the product may produce audio or 

video noise.

Wireless communication radio waves cannot 

penetrate steel reinforcements, metal, concrete, etc.

 

Communication is possible through walls and floors 

made from materials such as wood and glass (except 

glass containing wire mesh), but not through walls 

and floors made from steel reinforcements, metal, 

concrete, etc.

The product may not work properly due to strong 

radio wave from the broadcast station or the radio.

 

If there is any facility or equipment, which outputs 

strong radio wave, near the installation location, set up 

the product at a location sufficiently far from the source 

of the radio wave. 

Using the product outside the country

 

It is forbidden to take the product outside the country 

or region where you purchased it, so use it only in 

the said country or region. Also, note that depending 

on countries or regions there are restrictions on the 

channels and frequencies at which you can use the 

wireless LAN.

Summary of Contents for PressIT TY-WP2B1W

























Reviews: