4
English
Before Using
Features of the system
The wireless presentation system allows screens displayed on an image output device to be projected (mirroring) on a
display or projector installed at a remote location.
Since small screens of a smartphone, notebook computer, etc. can be displayed on a large screen, this system is
convenient to show presentation materials on a large display in a meeting, enjoy images on a large display, show
images with a display installed at a location where wiring cables is difficult or other cases.
This system is composed of a transmitter and a receiver, and sends images on an image output device to the receiver
via wireless LAN using the transmitter.
Also, images can be sent to the receiver from a mobile device (Android device) without using the transmitter.
Using the following methods allows images on an image output device to be displayed on a display or projector.
Send images on an image output device to the receiver using the transmitter to display the images on a display or
projector.
Send images on a mobile device (Android device) directly to the receiver using a dedicated application to display
the images on a display or projector.
Send images on a mobile device (Android device) to the receiver using a dedicated application via external
wireless LAN to display the images on a display or projector.
Note
•Depending on the usage environment, some of the displayed contents on the application screen or Web setting
screen may differ.
Precautions for use
■
When transporting this product
Do not apply excessive vibrations or impacts during transport.
Doing so may damage the internal parts, resulting in a malfunction.
■
When installing this product
Do not install the product outdoors.
This product is intended for exclusive use indoors. Using it outdoors is prohibited by radio wave-related laws.
Do not install the product in the following locations.
•Locations subject to vibrations or impacts such as vehicles and vessels: The internal parts may be damaged,
resulting in a malfunction.
•Near the sea or locations where corrosive gases are generated: The life-span of parts may be affected or a
malfunction may occur.
•Near high-voltage wires or power sources: The operation of the product may be disturbed.
Do not install the product at a location of 2 700 m (8 853 ft) or higher above sea level.
Doing so may affect the life-span of parts or cause a malfunction.
The operating temperatures for this product are 0 °C to 35 °C (32 °F to 95 °F) at a location of less than
1 400 m (4 593 ft) above sea level, and 0 °C to 30 °C (32 °F to 86 °F) at a location of 1 400 m (4 593 ft) or
higher and less than 2 700 m (8 853 ft) above sea level.
Do not block the air inlet and air outlet of the product. Do not use the product in a manner that disturbs inlet
and outlet of air.
Doing so may damage the internal parts, resulting in a malfunction.
We are not responsible for any product damage, etc. caused by failures in the installation environment even
during the warranty period.
