Control panel interface and modes
1
LED of compartments: the icon of the respective compartment will light up when the
compartment is selected.
2
Temperature and time display area: displays the temperature of Fridge room, Freezer
room, Prime Fresh room and the time for modes of the Prime Freeze.
3
Temperature control button of fridge room.
4
Control button of freeze room, control button and LED of Quick Freezing mode.
5
Temperature control button of Prime Fresh mode.
6
Temperature control button and LED of Prime Fresh+ mode.
7
Temperature control button and LED of Prime Freeze mode.
8
Control button of Quick Ice Making mode.
9
LED of Quick Ice Making mode.
0
Control button of Auto Ice Off mode, control button and LED of Auto Ice Clean mode.
a
LED of Auto Ice Off mode.
b
Icon nanoe
TM
X and display LED.
Caution
●
On the control panel: “*Extra function: Press 3 sec”, means that you need to press and
hold the button beginning with “*” mark for 3 seconds when you want to start the extra
functions.
●
Under normal conditions, the control panel light will turn off. When you press the buttons or
the refrigerator door is opened, the control panel light will turn on.
●
In summer, when the temperature is high, if you put uncooled food in the refrigerator or
open/close the refrigerator doors repeatedly, the temperature inside will increase and the
displayed value will be higher than the setting temperature. Therefore, it is necessary to
reduce doors opening times.
● When first plugged in, the control panel will display the introduction of modes and the
temperature of compartments for about 10 seconds. Buttons will not be active during this
period of time. After 10 seconds, the control panel can be adjusted normally.
14
Summary of Contents for PRIME+ NR-BW530X
Page 12: ...Parts identification 23 12 ...