Temperature Control
● The first temperature setting for Fridge room is 4 °C, Prime Fresh room is -3 °C and
Freezer room is -20 °C. The temperature setting for each compartment can be adjusted.
●
The temperature setting range of the fridge room is 7 °C ~ 1 °C, of the Prime Fresh room
is -5 °C (the temperature for soft freezing is -3 °C, and the temperature to use the Prime
Fresh room as the Fridge room is 4 °C ~ 0 °C), of the freezer room is -15 °C ~ -23 °C.
●
The temperature inside the refrigerator will vary depending on the ambient temperature,
installation status, usage conditions and amount of food.
●
Due to different testing methods and tools, the actual temperature may differ from the
displayed temperature.
●
This refrigerator is equipped with a processor to control the temperature inside the
refrigerator. When the ambient temperature changes, the compressor runs or stops, the
doors are opened or closed, the temperature inside the refrigerator and the temperature
setting will be slightly different.
Temperature setting instructions
1. Display the current temperature
Press the following icons to display the current temperature of these compartments: Fridge
room, Prime Fresh room, and Freezer room. When a compartment is selected, its LED which
indicates position and its LED which indicates temperature will light on.
Icon
Compartment
LED indicates
position of the
compartment
LED indicates
temperature of the
compartment
Fridge room
Prime Fresh room
Freezer room
2. Temperature setting
After pressing the icon of compartment (Fridge, Prime Fresh, Freezer) to display the current
temperature, press again to start the temperature setting process. Then, LED indicates
position of the compartment and LED indicates temperature of the compartment will flash.
Continue to press the icon of that compartment to select the desired temperature level. Each
time the button is pressed, the temperature will increase or decrease by 1 °C.
3. Complete temperature setting
After completing the temperature setting, press another button to finish and save the setting
that you have just made. Or if no other button is pressed within 10 seconds, the control panel
will save the setting and return to stand by mode.
15
Summary of Contents for PRIME+ NR-BW530X
Page 12: ...Parts identification 23 12 ...
