Panasonic PRIME+ NR-BW530X Operating Instructions Manual Download

Page: 17 / 36

Quick Freezing

When “Quick Freezing” is set, the refrigerator can reduce the temperature quickly for better

food preservation.

How to operate the “Quick Freezing” mode

Light is on: Quick Freezing

is operated.

Light is off: Quick Freezing

is not operated.

●

Press and hold the “Freezer” icon for 3 seconds to start

the Quick Freezing. Then, the light below the “Quick

Freezing” icon will turn on.

●

If you want to stop the Quick Freezing operation

immediately , press and hold the “Freezer” icon again for

3 seconds until the light turns off.

Caution

●

The “Quick Freezing” operation will stop automatically after running for 150 minutes and

return to normal mode. (The LED of [Quick Freezing] turns off.)

●The ﬂashing of [Quick Freezing] LED means that the defrosting system is currently working.

The “Quick Freezing” mode will start right after the defrosting operation is finished.

●

The temperature of the Freezer room will return to its previous setting when the Quick

Freezing mode ends.

●

The following modes will be stopped when Quick Freezing is turned on: Prime Fresh+ ;

Quick Ice Making; Prime Freeze.

Prime Fresh+

When “Prime Fresh+” is set, the Prime Fresh room can reduce the temperature quickly for

better food preservation.

How to operate the “Prime Fresh+” mode

Light is on: Prime Fresh+ is

operated .

Light is off: Prime Fresh+ is not

operated.

●

Press the “Prime Fresh+” icon twice to start

Prime Fresh+. Then, the light above the “Prime Fresh+”

icon will turn on.

●

If you want to stop the Prime Fresh+ mode immediately,

press the “Prime Fresh+” icon until the light turns off.

Caution

●

“Prime Fresh+” will stop automatically after running for 105 minutes (when the ambient

temperature is 18 °C or less) or between 145 ~ 150 minutes (when the ambient temperature

is higher than 18 °C) and return to normal mode. (The LED of [Prime Fresh+] (Prime Fresh+

room) turns off.)

●The ﬂashing of [Prime Fresh+] LED means that the defrosting system is currently working.

“Prime Fresh+” will start right after the defrosting operation is finished.

●

The temperature of the Prime Fresh room will return to its previous setting when “Prime

Fresh+” ends.

●

The following modes will be stopped when Prime Fresh+ is turned on: Quick Freezing; Quick

Ice Making; Prime Freeze.

●

“Prime Fresh+” will not start when the temperature of the Prime Fresh room is being set at

4 °C ~ 0 °C.

Summary of Contents for PRIME+ NR-BW530X





































Search results

Summary of Contents for PRIME+ NR-BW530X

Reviews:

Related manuals for PRIME+ NR-BW530X

Brands by name

Popular brands

Panasonic PRIME+ NR-BW530X, Operating Instructions Manual

Search results

Summary of Contents for PRIME+ NR-BW530X

Reviews:

Related manuals for PRIME+ NR-BW530X

Brands by name

Popular brands