1
Take the water supply tank
out.
2
Fill with water.
3
Install the water supply
tank.
Do not fill more
water than the “Max”
(Maximum) line.
Lid
Push the entire
water supply
tank in.
Pull out the water supply
tank until it is blocked.
Fill in water when the
water level is under “Min”
(Minimum) line.
Open the lid and fill the
water supply tank with water,
then put the lid back in
place.
Confirm the direction of the water
supply tank and install until the tank
touch the end of ice box holder.
(If the water tank does not touch
the end of ice box holder, the
ice maker could not operate)
* Ice could be made for about 2 hours, provided that the temperature in the fridge room is 4 °C,
that in the Prime Fresh room is -3 °C, and that in the freezer room is -20 °C.
How to make ice quickly
In the “Quick Ice Making” mode, the ice making speed will increase.
Ice cubes can be made in at least 90 minutes*.
Caution
●
After about 6 hours, the refrigerator will automatically return to normal automatic ice making
mode.
●
W
hen the refrigerator is in defrost mode, the LED light of [Quick Ice Making] will flash.
Quick Ice Making will restart automatically after the defrosting operation is finished.
●
In Quick Ice Making, the consumed energy will increase higher than normal.
●
ECONAVI operation does not work during the setting of “Quick Ice Making”.
* The room temperature is 20 °C, the temperature of the fridge room, the Prime Fresh room,
and the freezer room are 4 °C, -3 °C, and -20 °C, respectively.
How to use water tank of automatic ice maker*
Caution
●
Do not pour water directly into the icebox to make ice.
(Otherwise, the icebox may break).
●
Do not pour food or other things into the icebox.
(Otherwise, it is impossible the detect the correct amount of ice, and the automatic ice
maker may stop working, or the icebox may not be removed).
The ice making time will be longer in the following cases.
● The first time using the refrigerator.
(It will take at least 24 hours since the
automatic ice making function only starts
after the inside of the refrigerator is cool
enough).
●
When the refrigerator door is frequently
opened.
●
When the refrigerator door is slightly open.
●
When the refrigerator is too full.
●
When the room temperature is low during
winter or high during summer.
●
When an electrical fault occurs.
25
Summary of Contents for PRIME+ NR-BW530X
Page 12: ...Parts identification 23 12 ...
