Panasonic PRIME+ NR-BW530X, Operating Instructions Manual

The control panel 

flashes.

●

Are you adjusting the temperature of your refrigerator or 

freezer?

→  Flashes during installation. Please complete the setting or 

the control panel will stop flashing after 10 seconds.

Food becomes 

frozen.

●

Do you put the food near cold air holes?

●

Do you adjust the temperature control to less than 4 °C for the 

fridge room and/or -3 °C for the Prime Fresh room? 

→ Adjust to 

a higher temperature.

●

Do you put food in Prime Fresh room?

●

Are “Quick Freezing”, Prime Fresh+ room , Quick Ice Making, 

Prime Freeze case in active? (Page 17)
 

●

When the temperature is not set at 4 °C for the fridge room 

and -20 °C for the freezer room, the ECONAVI function does 

not activate automatically.
 

●

Is the door opened too often or are there hot food stored in the 

refrigerator?
 

●

The learning function can automatically disable the ECONAVI 

operation during regular use.
 

●

Does the refrigerator display any error codes?

●

Is there a power outage? 

If there is a power failure, the data collected by the learning 

function until the power failure will be lost.  

The ECONAVI operation is rarely active until the learning 

function could collect the data again.

●

If the automatic defrost function is enabled while the ECONAVI 

operation is active, the normal cooling mode will be activated 

after the defrosting process completes. As a result, the 

ECONAVI operation may be stopped during defrosting/cooling.

●

Sometimes, the learning function restarts the normal cooling mode.

●

Is the light intensity sensor hidden?
 

●

Are there any stains or scratches on control panel of the light 

intensity sensor?
 

●

The ECONAVI operation may operate while the refrigerator 

is in use depending on the usage conditions, but the cooling 

operation is still maintained.

34

The ECONA

VI light does not come on normally

. 

The 

ECONAVI 

function 

does not 

work (the 

ECONAVI 

light does 

not come 

on).

The 

ECONAVI 

operation 

is rarely 

active.

The 

ECONAVI 

operation 

is stopped 

halfway.

The ECONAVI 

operation 

works too 

often (the 

ECONAVI 

light rarely 

turns off).

Troubleshooting